Inspect to the design. Record it once.
First-article, receiving, in-process and final inspections against the controlled design, recorded as they happen, so the certificate writes itself and reliability starts at the first part.
- Planwhat to inspect
- Inspecton the tablet
- Measureeach characteristic
- Decideaccept, rework, hold
- Releasewith the certificate
The first part passed. The thousandth failed.
Most plants inspect carefully and still find the problem after the run. A first article inspected to the design, every characteristic recorded, is where reliability starts: the run is proven before it is made, and every later inspection tells you what is drifting.
From the design to the certificate, one record.
Plan
What to inspect comes from the design and the order: first article, receiving, in-process or final; the characteristics, the tolerances, the sample.
Inspect and measure
Each characteristic recorded on the tablet against the current revision of the design, with the inspector's role and the time.
Decide and release
Accept, rework or hold. The certificate and the nonconformance come from the same record, not from a retyped form.
Measured once. Proven anywhere.
The design on the screen
The current revision and the characteristics to measure, nothing to look up.
A new supplier, qualified fast
The first article planned from the design, measured once, decided on the record. Changing vendors stops being a quarter of paperwork.
Reliability you can see
First-pass yield, drift and returns by part and by supplier on the Clarity board, and a certificate the customer can trust.
Numbers we can stand behind.
In a May 2025 survey of manufacturers, 35 percent had found new domestic suppliers and 32 percent new foreign ones because of tariffs. Every one of those changes starts with a first article.Federal Reserve Bank of Richmond, regional survey, May 2025
Every count NEXUS shows you is measured on your own records: first articles passed, first-pass yield, characteristics drifting, holds open. We do not quote averages from someone else's pilot.
One record, eight modules.
The current revision
The inspection is against the issued design.
A failed characteristic becomes a finding
With its measurements attached.
The part on the asset
Which assets a part went into, so a recall never has to be wide.
First-pass yield and drift
By part, by supplier, by week.
A walkthrough on your own part.
Bring one design and one first article. In a working session NEXUS plans the inspection from the design in front of you, you measure it on a tablet, and the certificate appears. No slides, no migration, nothing to install.
One first article. One hour.
A design, a part and the person who signs certificates. Works the same with the intelligence switched off.